Quantcast
Channel: Mentor Graphics Communities : Discussion List - All Communities
Viewing all 2158 articles
Browse latest View live
↧

Integrated flow: packager errors/warnings

August 31, 2016, 6:21 am
$
0
0

I have been creating parts in the central library to correct the missing parts error from that packager that I asked about n a previous question topic. ( Integrated flow parts creation when Access Database already created ). I have created about one half of the parts in my design and I have exchanged an error for about 6 warnings on each part. An exacmple of one error on one part is:

 

 

Visit message location WARNING: Block Top Level!Processor, Page 1, Symbol $1I4585:

Symbol / PartsDB property mismatch:
Resolved PartNumber = ERJ-2GE0R00X

Symbol Property: Part Label = 0.0R
PartsDB Property: Part Label =

The property value on this symbol has not been changed.
Use the 'Update PDB Properties on symbol' option on the Packager menu

or use Device Replace to change the schematic symbol in order to
update the schematic to the PartsDB value as limited by the precision

specified in the Notation Settings dialog. Be sure that the
precision specified in the Notation Settings dialog is sufficient to

define the value exactly or this warning will continue.

I found previous topics concerning these warnings that say I needed to 'uncheck' the "Update PDB Properties On Symbol" selection on the packager dialog, and verify the check box for "place property in schematic when Packager or Place Device is used" is unchecked. It is not possible to 'uncheck' Part Number, Part Label, or Part Name in this dialog so I did not make a change here.

 

Packer reports "The following properties were checked off in the Property Definition Editor:
"Geometry.Height"
"Part Label"
"Part Number"
"Value"
"Part Name"" I assume that Geometry.Height and Value have no affect on these warnings.

 

I have re-run the packager (several times) and receive 797 warnings. My general rule is that warnings are "bad", and I need to eliminate them by determining and correcting the underlying cause. I still have 97 parts to create in my CL, but as it could be due to an wrror in my part creation process, I want to understand it now before I continue and propagate an unknown error.

 

Any help would be appreciated.

 

Thanks, Russ Troxel

↧
Search

The menu(Tools > Import PartQuest Parts) isn't indicated

August 25, 2016, 7:36 pm
$
0
0

I'm Japanese Engineer.In Japanese version "the Import PartQuest Parts command (Tools > Import PartQuest Parts)".
But, I can import PartQuest information by xDM Library Tools.

Furthermore, import_partQuest_Parts menu goes out in netlist-flow, but I don't move because it isn't PADS.

Please tell solution method.

↧
↧

Interactive Routing with Arcs

August 31, 2016, 8:56 am
$
0
0

Is there a way to interactively route RF traces & Diff Pairs with arcs? I must be doing something wrong???

↧

EMA Acquires Accelerated Designs for its Extensive Part Library and Expertise

August 12, 2016, 5:30 am
↧

Trying PartQuest - .pqz extractor does not work

August 31, 2016, 8:41 am
$
0
0

Hi all,

I am trying to get PartQuest to work with VX1.1 on a windows platform, with DX front end.  I have followed al the instructions in the PartQuest_Workshop.pdf file and everything worked until the pint where it says
to right click on the *.pqz file to extract the component information.  When I right click, I get nothing.  No notices, no tools to run etc. 

 

 

 

I am excited to see if PartQuest can help me out.  Please let me know what I am doing wrong.

Thanks,

Shaun Olsen

↧
↧

Variant Lengths on a Bundle in Harness XC

August 31, 2016, 10:01 pm
$
0
0

Hello,

 

Can someone help me as how can i give variant length on same Bundle in Harness XC

 

In my design W4,W6 variant has 350mm length & W8,W10 has 310mm on same bundle.

 

↧

VX.2 crash!

August 31, 2016, 8:03 am
$
0
0

I just downloaded and installed the new release (64-bit version).

DX designer always crashes. I created a new project, then I open it, and if I click on the page (or select a menu choiche or another operation) the program crashes.

This happens on two PCs. Windows 7 64 bit, 8GB RAM.

How it is possible? Never happened before.

↧

Symbol cleanup

August 30, 2016, 1:29 pm
$
0
0

Hello,

 

I am using Xpedition Enterprise X-ENTP VX.1.1, when creating a new symbol from “Generate symbol from pinlist”,  I was able to utilize Preferences feature to get the symbol built per my settings. However, it does not have settings for the followings.  It is more of symbol cleanup, if you have any scripts that would work similarly, would you please provide or advise if there are alternatives that I can use?

 

Thank you,

 

Tran

 

Symbol Body

Extents: 0.200 left and right of pins, 0.200 above and below.

Origin: At lower left intersection of pins and body.

 

Symbol Outline

Placement: at pins on left and right, at body on top and bottom

 

Pin Number

Text Align: Lower right (if on left) | Lower left (if on right)
Placement: 0.05 from body, 0.025 from whisker

 

Ref Designator
Text Align: Lower Center
Placement: center-top 0.05 from body
Visibility: visible

 

mpn
Placement: center-bottom 0.05 from body
Visibility: visible

 

package
Placement: center-bottom 0.200 from body
Visibility: non-visible

 

Part Number
Placement: center-bottom 0.350 from body
Visibility: non-visible

↧
Search

Downgrade VX1.1 to EE7.9.5

August 24, 2016, 7:50 pm
$
0
0

Hi,

 

I am currently using DxDesigner Vx1.1 for schematic but my layouter is still working on the previous version using the 7.9.5 release.

Currently when i package the schematic, the layouter is not able to use the file since it is done in a newer version.

So is there any way for me to downgrade the file in order to make it usable for the layout?

 

Thanks

 

↧
↧

Installation of VX2

August 26, 2016, 10:33 am
$
0
0

Hello folks,

anybody tried to install the new version VX2?

 

I start with installing the docs on a separate tree and I get a minidump. (I raised  SR2875816906)

Then I tried with the main program, and there too I got another minidump.

 

Has anyone installed the new version with split documentation successfully and is there any caveta that I have to take care of?

 

Thanks

  Matija

↧

Automatically transfer decal from Land Pattern Creator to integrated central library

September 28, 2015, 4:17 am
$
0
0

How to automatically transfer part from Land Pattern Creator to integrated central library in PADS Standard Plus? I try PADS Standard Plus > Data and Library Management > xDM Land Patterns >Calculate > PTH Calculator >Find and select a land pattern >Wizard and select Cad Tool=PADS Layout, Library directory=C:\PADS_Stnd_Plus_Eval\PADSVX.1.1\Libs\CorporateDemo_CentralLibrary and Library Name=CorporateDemo_CentralLibrary.  Click "Create", it says "added successfully into library". But I can't see it in central library although click View>Refresh and search it with Find in xDM Library Tools.  Doesn't this automatic transfer function work in integrated flow of PADS? PADS Professional does already have this ability.

↧

How can I monitor capacity-license

September 1, 2016, 7:02 pm
$
0
0

I am looking for some tools to monitor Capacity-license usage to better understand additional needs.

The number of licenses concentrated in xDM can't be monitored by flex license management.

Please tell the taking technique of Log-printout of the total number of open-sessions(xDM Library Capacity user Op SW) in xDM Library Server Administration tool.

In addition also, the total number of licenses of #3308,#1228,#102116.

 

・・・If possible, DB Library category

↧

Generating Component Placement List (CPL) file (using scripts?)

May 26, 2016, 5:53 am
$
0
0

Hi everyone!

 

Most of our PCB-s are assembled by automated pick and place machines. Because of this we need to generate a CPL file very often. For this we use a very obsolete and inconvenient method where you have to modify a lot of thing by hand to get the final result. We didn't have problems with is yet, but I'd prefer a more productive way to generate such a file (txt, csv, excel.... ). My problem is I can't find a way to do this in expedition. If there is a way to generate these files please tell me how could I manage this.

 

However I found one way to do this, and it is scripting. Well I'm not much of a programmer but I've tried to use the help's: Exercise 6 (Generating a component CSV file). I copy-pasted it to a text editor and wanted to use it (first I made the via counting script which worked fine), but the component CSV script had problems with the licensing phase, I've found out that the function is not defined in the script and I had to copy it from the via counter script. But now it complains about the WriteHeaders subroutine which is also not defined so the complain is correct, but I couldn't find this function anywhere, so I cant put it in the script. I guess the same would happen with WriteComponents... etc... functions, because none of the is defined in the script. Although help says the following: ''Use the scripting editor of your choice to enter the script described (including the license server function) and save the script as ComponentCVS.vbs.'' etc... This happened, and every other thing help wrote. But according to my programming knowledge if a function is not defined it wont work. Even if there's another way to generate the CPL file, I'd like to get this script working to, because it would be grate for unique export options.

Here's a picture about the issue:

 

XPCB script error.JPG

 

I've attached the script too.

 

Thanks for the help!

Best regards!

Laszlo Galantai

↧
↧

How you Map a 3D Model to a Mechanical Cell

September 1, 2016, 11:13 pm
$
0
0

Just wonder if someone found a good way to map a 3D Model to a Mech. Cell. Moust of my Mech have no Part Number. And since the mapping goes via Part number i can not add a 3D Model to a Mech. Cell.

 

I wasen't aware  of this until now...

 

↧

Can't unlock trace

April 7, 2015, 2:45 am
$
0
0

I use expedition pcb7.9.4

I have a problem on PCB i locked some trace on pcb. but now i want to move them. I click unlock, unfix button to unlock them. i got a message in status bar

2015-04-07_164429.jpg

 

Please lets me know how to unlock there trace. I tried many many time, use route mode, drawing mode. I can't move it.

Thanks,

↧
Search

xDX Designer VX.2 new features

August 30, 2016, 3:00 am
↧

Import Cells from Central Library by using a VBScript?

September 2, 2016, 1:22 am
$
0
0

Hello,

I want to Import Cells from the Central Library by using a VBScript.

 

Maybe in Drawing Editor when there are missing Drawing-Cells. So that the User don't needs

to use the Library Services Tool and have to collect the correct cells.

↧
↧

Automatic Update Custom Plugin Table

September 1, 2016, 4:19 am
$
0
0

In 2015.1 1606 ,

Custom Plugin Table is generated , But if we change Wire / Connector Object properties

it is not immediately reflected in Capital

But if I use "Update Border" I can see those changes in Plugin Table

 

What could be the reason for this.

I am currently upgrading my Java to the latest Version , also my compiler to latest version and trying a recompile

If there is ready made answer , pl give me a shout

 

Regards

Vamsi Krishna

↧

Alternate symbols in DxDesigner

May 11, 2016, 11:20 am
$
0
0

How does DxD handle alternate symbols, such as a vertical capacitor symbol and a horizontal capacitor symbol for the same capacitor part number? 

In PADS Logic I set up 'CAE Decal 1' and 'CAE Decal 2' under the Gates tab in the Part Editor.  Then I can hit <ctrl><tab> or <right-click><alternate> to cycle through the decal choices.  Does DxD have something like that? 

 

Thanks,

John D

↧

Is there a edit mode to Auto-Route?

July 16, 2016, 7:30 am
$
0
0

The Auto-Route is very good but when we talk about ground nets/wires!

 

Why Auto Route leaves ground conductors so short?

 

Is there a way to edit or increase this length from ground conductors in autoroute?

↧
Viewing all 2158 articles
Browse latest View live
Search